The entire document will be printed in black and white.

The entire document is printed in color.

You can specify which pages should be printed in color. Specify a number of pages or a page range: 1-5,18,21. We assume the preview numbering where the front counts as page 1.

Final size (after finishing) is A4

Final size (after finishing) is A3, 297x420mm

Only the front is printed. The back remains blank.

Both the front and back are printed.

The book will be produced without dividing sheets.

You can indicate which pages should be preceded by an unprinted blue dividing sheet. Indicate specific pages as follows: 18,21,100. We assume the PDF numbering, you can check the correct input in the preview. For clarification purposes, a dividing sheet is inserted before the page number(s) you specify. With this you automatically ensure that the specified pages start on a new sheet and are therefore always printed on the right side.

Extra thick and very opaque, for superior printing results. With this quality your document stands out more and gives a very solid appearance. The paper is slightly smoother than 'firm' paper, with double-sided printing there is hardly any print through. Excellent writability.

Suitable for:
Title page, Graphically high quality documents, flyers, posters, design documents

Environment: EU Ecolabel, PEFC, FSC Mix, ISO 14001 (strengthening & controlling environmental conservation)
Properties: Pro Design 160 grams, ironed paper, ISO 9706 (resistant to aging), print is waterproof, whiteness class 164cie, 158um thick, 96% opacity

Very glossy paper on which photos look very nice. This paper is off-white in color and glossy on both sides, so double-sided printing is no problem. It is very suitable for photos but not comparable to high-gloss photo paper that photo specialty stores supply.

Suitable for:
Flyers, Posters, Posters, Photo Books

Environment: Woodfree ECF, EU Ecolabel, FSC Mix, EMAS, ISO 14001 (enhancement & management of environmental conservation) and ISO 50001 (energy limitation & sustainability)
Properties: DigiGold Gloss 170 grams, machine coated gloss paper, ISO 9706 (resistant to aging) and ISO 9001 certified, whiteness class 138cie, 138um thick, 98% opacity

Very thick and very white, guaranteed razor-sharp prints and bright colors. Because the paper is ironed, it has a slight shine (but is absolutely not glossy). Excellent writable paper.

Suitable for:
Flyers, Portfolio, Loose pages

Not possible with:
Perfect binding

Environment: FSC Mix, woodfree ECF, EU Ecolabel, ISO 14001 (strengthening & controlling environmental conservation)
Properties: Pro Design 250 grams, coated paper, ISO 9706 (resistant to aging) and ISO 9001 certified, print is waterproof, whiteness class 168cie,250um thick, 98% opacity

White paper with a noticeable paper fiber (less than our Classic paper type). Ensures a very mat appearance and is thickening for extra firmness.

Suitable for:
cards, business cards, certificates, posters

Environment: ECF, FSC Mix, EU Ecolabel, ISO 14001 (reinforcement & management of environmental conservation)
Properties: Print Speed offset white 300 grams, wood free un-ironed paper, ISO 9706 (resistant to aging) and ISO 9001 certified, print is waterproof, whiteness class 161cie, 378um thick, 99% opacity

Super firm 350 grams paper, off-white. Both sides coated with a light gloss (is more mat than glossy). Is suitable to write on, but it takes a few seconds for it to dry well (so it smears a bit if you brush over it too quickly).

Suitable for:
Business cards, Cards, Portfolio, Loose pages

Environment: FSC Mix credit, EU Ecolabel, ECF certified
Properties: MultiCard 2S 350 grams, mc paper (machine coated), print is waterproof, whiteness class 133cie, 345um thick, 100% opacity

Warm (off-white) paper of which the structure is slightly visible through the print. The surface is not very rough, but absolutely not smooth either, it feels a bit soft. Color prints and texts come out well, but due to the broken structure prints are less sharp than on smooth paper types. There is a minimal variance in structure between the front and back, but the color tone is the same on both sides and comparable to Old Dutch. Excellent writable paper type.

Suitable for:
cards, business cards, certificates, posters

Not possible with:
Perfect / thermal binding, laminating, coating

Environment: FSC Mix C018501, woodfree ECF certified
Properties: MetaPaper Extra Rough 320 grams, eggshell embossed, print is waterproof, 453um thick, 98% opacity

Warm (off-white) paper with a clear line structure, this is also visible through the print. The surface feels very rough but soft due to the relief. The color tone is the same on both sides and comparable to Classic. Excellent writeability. Note: The direction of the line structure may vary per assignment.

Suitable for:
cards, business cards, certificates, posters
< br>Not possible with:
Binding, coating

Environment: FSC, ECF (Chlorine-free), 94/62/EC (free of heavy metals), ISO 9001
Properties: Gmund Original Verge 300 grams, laid, print is waterproof,325um thick, 100% opacity

A linen structure (sort of grid pattern) that is visible. Texts are still sharp and legible, photos / images are slightly more broken due to the relief. The whiteness is slightly warmer, but whiter than Classic or Old Dutch paper. Surface and color are the same on both sides.

Suitable for:
cards, business cards, certificates, posters

Not possible with:
Binding, coating

Environment: FSC, ISO 14001 (enhancement & control of environmental conservation)
Properties: FocusCard 300 grams, 2-sided linen pressing, wood-free smooth natural cardboard, ISO 9706 (resistant to aging), print is waterproof,328um thick, 100% opacity

Unique type of paper with a crystal white pearly effect and shines from all viewing angles. The effect is strongly present and therefore we only recommend this with the correct application (e.g. invitation to a gala party). The surface is slightly rough and the structure of paper is very slightly visible (but not disturbing). Surface and color (crystal clear white) are the same on both sides. Excellent writable paper type.

Suitable for:
cards, business cards, certificates

Not possible with:
binding, coating

Environment: FSC Mix C018501, woodfree ECF, ISO 14001 (reinforcement & control of environmental conservation)
Properties: Curious Metallics 300 grams, silver white pearl effect, ISO 9706 (resistant to aging), print is waterproof, 414um thick, 98% opacity

This ecological paper (almost cardboard) is made from agricultural waste and therefore has a very low 'footprint'. You can slightly feel the fibers of the paper type and due to the production method the surface is not homogeneously constructed. This is not disturbing and gives it a contemporary character. The color is beige and both sides are the same, but the shade does have an effect on the color & readability (we do not print white as the background color). Due to its robustness and structure, this material can also be assessed as cardboard. Excellent writable paper type. Note:It is possible that surface effects are visible through the print.

Suitable for:
cards, business cards, certificates, posters

Environment: Made from agricultural waste, unbleached compostable, wood free ECF, ISO 14001 (strengthening & controlling environmental conservation)
Properties: PaperWise 295 grams, non-ironed paper, natural brown color, 439um thick, 100% opacity

A special and unique paper type made from leftover tulip bulbs. The paper is not chemically bleached, giving it a warm white tone. The tulip bulb fibers are clearly visible and vary with every print, making each sheet completely unique.

Suitable for:
Business cards, cards, certificates

Environment: FSC gecertificeerd
Properties: Flowerpaper (tulip) 300 gsm, visible tulip bulb fibers, water-resistant print, 400 µm thick, 100% opacity.

Polyester is tear-, water-, and weather-resistant, making lamination unnecessary. It is a special PVC material suitable for printing, producing excellent print results. The 350 µm thickness is comparable to 450 gsm paper. It can be written on with a ballpoint pen, marker, and pencil.

Resistant to:
Intensive use, rain, sweat, all-purpose cleaner, disinfectant, lubricating oil.

Suitable for:
Signs, posters, menus, manuals, back numbers, product labels

Environment: 15% recycled plastic (rPET), contains no PVC, phthalates, or heavy metals.
Properties: Synaps XM, bright white polyester, complies with safety standard EN 71-2 (1995), ISO 14001 (environmental management) and ISO 9001 (quality management) certified. Thickness 350 µm, whiteness class 97 CIE, 97% opacity.

The finishing is without round corners.

The corners are rounded by machine with a radius of 3/8" (9.5 mm).

Wire-O binding is a widely used method for binding, the pages are held together by means of a metal spiral ring made of solid steel. The main advantage is that the book can be opened up completely.

Metal spiral binding in silver. This binding is much more elegant compared to the commonly used plastic rings. We ensure that the binding is properly closed so the pages do not come loose.

Metal spiral binding in black. This color is very elegant in combination with a white front cover and a black header.

Metal spiral binding in white. This color is elegant and blends in with white pages. As a result, the focus remains on the interior content without the binding being distracting.

Transparent cover that provides protection and feels sturdy. The transparency is slightly matte, which reduces sensitivity to scratches and also gives it a more luxurious appearance.

The title page of your document (1st page) is printed on 350 gsm paper (matte coated with a slight sheen) and forms the outer cover. If you choose double-sided printing, it will be printed on both sides as well (unless you select single-sided printing for the front cover).

Combination of the Printed (350 grams card) option with a fully coated exterior (glossy). This coating provides extra protection against dirt, water, and scratches.

Combination of the Printed (350 grams card) and Transparent (plastic) options.

A back cover made of black cardboard (250 grams).

Transparent cover that provides protection and feels sturdy. The transparency is slightly matte, which reduces susceptibility to scratches and also gives a more luxurious appearance.

A back cover made of sturdy white cardboard (350 grams, matte coated with a slight sheen), made from the same material as the printed front cover (very sturdy). With this option, the backside can be printed as well.

Combination of the White (350 grams card) option with a fully coated exterior (glossy). This coating provides extra protection against dirt, water, and scratches. With this option, the backside can be printed as well.

Combination of the Printed (350 grams card) and Transparent (plastic) options. With this option, the backside can be printed as well.

Both the front and back of the title page (the first page in the file) will be printed. If you do not want this, choose single-sided title page.

The front cover (1st page of your document) is printed on one side only, while the back remains blank. Do not add a blank page if you choose this option.

No calender hook or hole.

With this option, the spiral binding is fitted with a calendar hook, allowing it to be hung on a wall.

The backside will not be printed. The backside will stay white.

The last page of your document is visible on the outside (the back). If you have chosen double sided printing, the inside might also be printed, this depends on the number of pages of your document. If you want to avoid this, add a blank page to your document. If you are uncertain, check the preview.