accessory_item
|
-
tape_double_sided
Double-sided tape (4 strips)  Double-sided tape is suitable for mounting on tiles, glass, wood and most plastics (the smoother, the better the adhesion) with a maximum load of 2kg. For optimal adhesion, it is important that the surface is free of grease and dust. You order them per 4 strips of 2x5cm.
-
suction_holder
Spacer with suction cap  A simple spacer with suction cap to place panels on smooth surfaces (only for indoor use). Panel thickness can be a maximum of 8 mm. The screw-thread of 4 mm diameter is 10 mm long on which a white plastic knurled bolt secures the plate. The suction cup is transparent and has a diameter of 50 mm. You order them per set of 4 pieces (so if you order a quantity of 1 you get 1 bag of 4 spacers). If you order this spacer in the order form of the panel, we will drill the holes (25 mm from the edge), if you do not want holes, you can also order the spacers separately.
-
rvs_spacer
Stainless steel spacer  Luxury stainless steel spacer for indoor and outdoor use. This one has a 15mm head and a 15mm wall clearance. Suitable for panel thicknesses of 2-10mm, the drilled hole is 11mm. They are ordered in sets of 4, including Phillips screws and wall plugs (so if you order one, you'll receive one bag of 4 spacers). If you order this spacer using the sign's order form, we will pre-drill the holes (15mm from the center of the hole to the edge). If you don't want this, you can also order the spacer separately.
-
alu_spacer_black
Black spacer  Black spacer suitable for indoor and outdoor use. It has a head diameter of 15 mm and a wall distance of 15 mm. Suitable for panel thicknesses of 2–10 mm, with an 8 mm drill hole. They are sold in sets of 4, including crosshead screws and plugs (so if you order a quantity of 1, you’ll receive 1 bag of 4 spacers). If you order this spacer via the board order form, we will drill the holes (15 mm measured from the center of the hole to the edge). If you prefer, you can also order the spacer separately without drilling.
-
rvs_spacer_side
Side spacer Premium stainless steel spacer suitable for indoor and outdoor use. It has a head diameter of 15 mm and a wall distance of 15 mm. Suitable for panel thicknesses of 2–8 mm and attaches to the side of the panel (no drill hole required). Sold in sets of 4, including crosshead screws and plugs (so if you order a quantity of 1, you’ll receive 1 bag of 4 spacers).
-
metal_plate
Metal mounting plate  With this mounting plate you can easily and quickly hang your panel thanks to the self-adhesive system. It is suitable for indoor- and outdoor use with a maximum load of 6kg. 1 set consists of one mounting plate (100x100mm), screw 4x30mm, nylon plug 6x30mm, wall hook, 2x self-adhesive transparent spacers, alcohol wipes and instruction.
Note: The plate must remain under pressure for 24 hours before the sign is hung.
-
namebadge
Namebadge  Transparent name badge in which you can insert a business card of 55x85mm. Provided with a pin and clip, will be delivered in protective foil.
-
posterstrip
Posterstrip  With these strips you can easily hang your poster flat against the wall. Contains a bottom and top strip. 
-
hanger_wood
Wooden poster hanger  The wooden slats are equipped with magnets, making it very easy to change / place them. A complete set for 1 poster therefore has 4 slats, of which 1 has a suspension cord.
Note: The slats are 20mm high and therefore cover a small part of the design.
-
velcro
Velcro fasteners (circles)  With the self-adhesive Velcro circles you can easily mount the poster on smooth surfaces without leaving permanent damage. The Velcro circles are white in color and self-adhesive. You will receive a set for the 4 corner points (4x soft circle, 4x coarse circle). 
-
wooden_stand
Beech wooden base  Multifunctional card holder made of beech wood. Present your photos, menus or price tags in a "natural" way. The slot is 2mm and suitable for all sturdy paper types or display cardboard.
-
table_stand
Table stand (stainless steel)  You will receive 2 oval-shaped silver-colored 'feet' which are easy to attach (no mounting holes are required, but the board must be at least 3mm thick).
You mount the feet at the bottom of the panel and clamps by means of the lock nut (note that you must turn this in the opposite direction than you are used to). For sufficient strength, we recommend this up to A3 size.
-
easel
Stand-up (with hanging option)  Stand-up to freely put up or hang a firm panel or card. Depending on the chosen size the matching stand-up will be delivered. The stand-up is multi-functional, it can be used as a footrest but also offers the possibility to hang with one punch hole.
|
String |
|
|
size
|
-
a6
A6 size  Final size (after finishing) is A6.
-
a5
A5 size  Final size (after finishing) is A5
-
a4
A4 size  Final size (after finishing) is A4
-
a3
A3 size (297x420mm)  Final size (after finishing) is A3, 297x420mm 
-
a2
A2 size (420x594mm)  Final size (after finishing) is A2, 420x594mm
-
a1
A1 size (594x841mm)  Final size (after finishing) is A1, 594x841mm
-
a0
A0 size (841x1189mm)  Final size (after finishing) is A0, 1189x841mm
-
55x85
Business card 55x85mm  Small quantity business cards, fast delivery. 
-
140
Easel 140mm  Easel of 140mm, intended for panels with a height between 130-210mm. 
-
200
Easel 200mm  Easel of 200mm, intended for panels with a height between 180-310mm. 
-
290
Easel 290mm  Easel of 290mm, intended for panels with a height between 240-420mm. 
-
400
Easel 400mm  Easel of 400mm, intended for panels with a height between 340-600mm. 
-
570
Easel 570mm  Easel of 570mm, intended for panels with a height between 450-800mm. 
-
o16
Velcro fastener ø16mm The velcro circles are white and self-adhesive. You will receive a set for the four corners (4 soft circles, 4 rough circles). Ø16 mm is suitable for small posters up to A3 size.
-
o45
Velcro fastener ø45mm  The velcro circles are white and self-adhesive. You will receive a set for the four corners (4 soft circles, 4 rough circles). Ø45 mm is suitable for large posters from A2 size onward.
|
String |
|
|
