You can specify a different size here (width x height in mm). You enter the final size that must remain after trimming (without bleed) or finishing (folding, binding, etc.) or finishing (folding, binding, etc.)

The entire document is printed in color.

The entire document will be printed in black and white.

Only the front is printed. The back remains blank.

Both the front and back are printed.

Most environmental friendly paper with a lower eco footprint than FSC, EU or recycled paper. PaperWise is made from agricultural waste and with 100% green energy, has a high whiteness and dense surface. The quality of the paper is also excellent and at least as good as standard office paper. The disadvantage is that the ink soaks into the fibers and results in a faded print.

Suitable for:
Manuals, ebooks, teaching materials, simple booklets, single use

Environment: Made of 100% agricultural waste, ISO 14001 (reinforcement & control of environmental conservation), Chlorine-free
Properties: Paperwise 80 grams (ecological), ISO 9706 (resistant to aging) and ISO 9001 certified, print is water resistant, whiteness class 165cie, 103um thick, 91% opacity

Cream paper type with a fine soft look. Mainly intended for reading books where the soft cream-colored tint ensures less contrast and pleasant readability. The paper is very matt and excellent for writing.

Suitable for:
(reading) books, magazines, brochures, notebooks, flyers and price lists

Environment: Made from 100% recycled material, FSC, PEFC, EU Ecolabel, EMAS, TCF, ISO 14001 (reinforcement & control of environmental conservation)
Properties: Munken Pure 90 grams crème white, thickening, ISO 9706 (bestand tegen veroudering), afdruk is watervast, whiteness class 62cie, 115um thick, 90% opacity

Ideal for color printing, no waves with intensive colors. This paper provides extra contrast, vivid colors and sharpness. It is somewhat smoother than 'standard' paper and has less problems with transparency (print-through on double-sided). We recommend this type of paper for double-sided printing, intensive color use and for a more luxurious appearance. Excellent writability.

Suitable for:
Theses, Thesis, Reports, Family books, Presentations

Environment: EU Ecolabel, Woodfree ECF, FSC Mix, ISO 14001 (strengthening & controlling environmental conservation)
Properties: Pro Design 100 grams, ironed paper, ISO 9706 (resistant to aging), print is water resistant, whiteness class 165cie, 109um thick, 94% opacity

Extra thick and very opaque, for superior printing results. With this quality your document stands out more and gives a very solid appearance. The paper is slightly smoother than 'firm' paper, with double-sided printing there is hardly any print through. Excellent writability.

Suitable for:
Title page, Graphically high quality documents, flyers, posters, design documents

Environment: EU Ecolabel, PEFC, FSC Mix, ISO 14001 (strengthening & controlling environmental conservation)
Properties: Pro Design 160 grams, ironed paper, ISO 9706 (resistant to aging), print is waterproof, whiteness class 164cie, 158um thick, 96% opacity

Very glossy paper on which photos look very nice. This paper is off-white in color and glossy on both sides, so double-sided printing is no problem. It is very suitable for photos but not comparable to high-gloss photo paper that photo specialty stores supply.

Suitable for:
Flyers, Posters, Posters, Photo Books

Environment: Woodfree ECF, EU Ecolabel, FSC Mix, EMAS, ISO 14001 (enhancement & management of environmental conservation) and ISO 50001 (energy limitation & sustainability)
Properties: DigiGold Gloss 170 grams, machine coated gloss paper, ISO 9706 (resistant to aging) and ISO 9001 certified, whiteness class 138cie, 138um thick, 98% opacity

Very thick and very white, guaranteed razor-sharp prints and bright colors. Because the paper is ironed, it has a slight shine (but is absolutely not glossy). Excellent writable paper.

Suitable for:
Flyers, Portfolio, Loose pages

Not possible with:
Perfect binding

Environment: FSC Mix, woodfree ECF, EU Ecolabel, ISO 14001 (strengthening & controlling environmental conservation)
Properties: Pro Design 250 grams, coated paper, ISO 9706 (resistant to aging) and ISO 9001 certified, print is waterproof, whiteness class 168cie,250um thick, 98% opacity

White paper with a noticeable paper fiber (less than our Classic paper type). Ensures a very mat appearance and is thickening for extra firmness.

Suitable for:
cards, business cards, certificates, posters

Environment: ECF, FSC Mix, EU Ecolabel, ISO 14001 (reinforcement & management of environmental conservation)
Properties: Print Speed offset white 300 grams, wood free un-ironed paper, ISO 9706 (resistant to aging) and ISO 9001 certified, print is waterproof, whiteness class 161cie, 378um thick, 99% opacity

Super firm 350 grams paper, off-white. Both sides coated with a light gloss (is more mat than glossy). Is suitable to write on, but it takes a few seconds for it to dry well (so it smears a bit if you brush over it too quickly).

Suitable for:
Business cards, Cards, Portfolio, Loose pages

Environment: FSC Mix credit, EU Ecolabel, ECF certified
Properties: MultiCard 2S 350 grams, mc paper (machine coated), print is waterproof, whiteness class 133cie, 345um thick, 100% opacity

This ecological paper (almost cardboard) is made from agricultural waste and therefore has a very low 'footprint'. You can slightly feel the fibers of the paper type and due to the production method the surface is not homogeneously constructed. This is not disturbing and gives it a contemporary character. The color is beige and both sides are the same, but the shade does have an effect on the color & readability (we do not print white as the background color). Due to its robustness and structure, this material can also be assessed as cardboard. Excellent writable paper type. Note:It is possible that surface effects are visible through the print.

Suitable for:
cards, business cards, certificates, posters

Environment: Made from agricultural waste, unbleached compostable, wood free ECF, ISO 14001 (strengthening & controlling environmental conservation)
Properties: PaperWise 295 grams, non-ironed paper, natural brown color, 439um thick, 100% opacity

Polyester (Nevertear) is tear, water and weather resistant, making plasticization unnecessary. It is a special PVC material that is suitable for printing, prints look excellent. 125µm is comparable to 150 gram paper.

Resistant to:
Intensive use, rain, sweat, all-purpose cleaner, disinfectant, lubricating oil.

Suitable for:
Menu cards, manuals, back numbers, product labels, flyers

Environment: Contains no chlorine, CFC's, or other halogens
Properties: Xerox Nevertear 125µm, bright white polyester, meets the safety standard EN 71-3 (1995), 118um thick, 99% opacity

Polyester is tear-, water-, and weather-resistant, making lamination unnecessary. It is a special PVC material suitable for printing, producing excellent print results. The 350 µm thickness is comparable to 450 gsm paper. It can be written on with a ballpoint pen, marker, and pencil.

Resistant to:
Intensive use, rain, sweat, all-purpose cleaner, disinfectant, lubricating oil.

Suitable for:
Signs, posters, menus, manuals, back numbers, product labels

Environment: 15% recycled plastic (rPET), contains no PVC, phthalates, or heavy metals.
Properties: Synaps XM, bright white polyester, complies with safety standard EN 71-2 (1995), ISO 14001 (environmental management) and ISO 9001 (quality management) certified. Thickness 350 µm, whiteness class 97 CIE, 97% opacity.

No additional top layer is added to the product. Would you like extra protection or a specific finish? Then choose coating or lamination.

The coating is a transparent top layer that provides extra shine and protection. This also provides (limited) protection against water (for example, spilling a cup of coffee). You should not compare this to laminate, because the coating is formed by transparent toner that seals the paper and the print.

The finishing is without round corners.

The corners are rounded by machine with a radius of 3/8" (9.5 mm).

The front will be coated. The coating is a transparent top layer that provides extra shine and protection. You should not see this as a lamination layer, because the coating is formed by transparent toner that seals the paper and the print.

The front and back will be coated.